| Types | Accessories | Software |
Rapid Analysis Probe (RAP)
Reflectance measurements with probe window in contact with sample
Samples: dry powders, or fine grains, flat solid surfaces, or soft samples that the probe can press into
[sample area should be at least one-half inch (1.3 centimeters) in diameter]
The Rapid Analysis Probe is specifically designed for speedy spectral collection of powders and other fine-grained materials such as small uniform seeds and grains. Its beveled tip and metal jacket greatly speed up the spectral collection process of fine grained materials to optimize workflow. Simply insert the Rapid Analysis Probe into your fine-grained media, collect the spectrum, use a chemical wipe to swipe the probe clean and move on to the next sample. It’s that easy! The Rapid Analysis Probe comes with a gimbaled white reference for high performance calibration. It can be used for quantitative predictive models.
Reflectance measurements with probe window in contact with sample
Samples: dry powders, or fine grains, flat solid surfaces, or soft samples that the probe can press into
[sample area should be at least one-half inch (1.3 centimeters) in diameter]
GoLab™ Mobile Work Station
Mobile Work Station for portable ASD spectrometers - Now, technicians and researchers, armed with a powerful ASD spectrometer system and the goLab™ Mobile Work Station, are more empowered than ever before to take the lab to the sample location, and easily perform analyses formerly restricted to a laboratory environment.The goLab™ Mobile Work Station acts as a wheeled carrier for streamlined transport between locations, and then quickly unfolds to support all your sampling needs.
 ASD goLabTM ve taşınan LabSpec® 5000 ile maddelerin analizi. |
The goLab™ Mobile Work Station Features: • Large wheels for easy transport. • Stable, non-slip platform for spectrometer, sampling probe, and computer. • Convenient and secured compartments for batteries and accessory kit. • Compatible with all current ASD portable spectrometer systems (excluding HandHeld) • Folds down for compact storage and transport. • Ideal for both inside and outside work. • Reconfigurable velcro positioning for added flexibility |
 |
Sampling Accessories
• Contact Probe |
The ASD High Intensity Contact Probe is designed for contact measurements of solid raw materials such as minerals, grains, other granular materials. Its innovative optical design minimizes measurement errors associated with stray light and allows for measurement of samples through clear and transparent plastic bags. Also available with the ruggedized cable feed and cable for applications requiring extra cold or harsh temperatures. |
 |
|
• Plant Probe |
The same great design and functionality as the High Intensity Contact Probe with a lower intensity bulb position for non-destructive data collection from live vegetation and other heat sensitive targets. Combine the Plant Probe with the ASD Leaf Clip (shown right) for easy one-handed functionality with improved measurements. ASD’s Leaf Clip assembly is designed specifically for use with the Plant Probe to simplify the process of collecting spectra on live vegetation. The unique design includes a gentle trigger lock/release gripping system for holding the target sample in place without removing the leaf from its habitat, or inflicting damage. |
 |
• Leaf Clip Assembly  |
The Leaf Clip offers the added benefit of a two-sided, rotating head. Each side has an embedded background panel making the Leaf Clip assembly ideal for both reflectance (black panel face) and transmittance (white panel face) measurements. The Leaf Clip also works with ASD’s other Contact Probes, offering one-handed functionality and improved measurements on thin targets, including mosquito netting (used in international efforts to fight malaria epidemics), films, and others. |
 |
| • Muglight (High Intensity Source Probe) The ASD High Intensity Muglight is designed for analysis of raw materials requiring reflectance and absorbance measurements. It can measure samples through glass vials, or using the ASD sampling tray adapter. It’s unique and innovative design minimizes measurement errors associated with stray light and specular reflected components. • Hi-Brite Muglight The same design, features, and benefits of the High Intensity Muglight, but with a higher intensity illumination setting on the sample window. This higher intensity illumination is ideal for inorganic applications, and is recommended for use with the TerraSpec®, FieldSpec® 3 Hi-Res, and TerraSpec® 5100 and 2600 models. The Hi-Brite Muglight is designed for analysis of raw materials requiring reflectance and absorbance measurements. It can measure samples through glass vials, or using the ASD sampling tray adapter. It’s unique and innovative design minimizes measurement errors associated with stray light and specular reflected components. |
 |
| Reflectance Probes ASD offers a variety of reflectance probes for various contact reflectance measurements. A selection of spacer attachments can be combined with the reflectance probe for distance uniformity depending upon the sample size and type. |
 |
 |
| • Turn Table When your application requires analysis of irregularly shaped or non-homogeneous samples, the ASD Turntable is ideal for obtaining a highly accurate average. Especially useful for instrument owners in the grain, agriculture, pulp and paper, food, plastics, and mining industries. |
 |
• Dip Probe Romack Fiber Optic Dip/Absorptance/Tranflectance Probe Fiber: 600µm LOH S/S 0.22NA 1st End: 6" Probe 2nd End: SMA 905 (2 each) Jacket: PVC Monocoil Length: 2 meters nom with a leg length of 1 meter or 1/2 meters 2mm path. Path’i 1mm,2mm, 5mm, 10mm ve 20mm olan modelleri mevcuttur. |
 |
| • Multi-purpose Fiber optic Fixture The Multi-purpose Cuvette Fixture is a must have for liquid analysis applications. With a user changeable path-length setting from 0.5mm to 50mm, this accessory is sure to solve your application needs. Stand the fixture on its end and you are able to do transmission measurements of thin films, or small volume liquids with the use of a microscope slide and cover slip. |
 |
 |
| İnce yapı (9.5" x 3.75" x 4" yada 24.13 cm x 9.52 cm x 10.16 cm), ışık ağırlığı (3 lbs. 9.4 oz. yada 1.63 kg) ve yüksek fonksiyonlu dizaynı uygulamanızın ihtiyacına hazır bir şekilde yatay yada düşey tam eşit bir biçimde oturur. Çok amaçlı Fibetoptik demirbaşı takılabilir örtüsü, geniş tablası ve fiberoptik kablo tutucusu ile standart olarak verilir. | ||
| • Integrating Sphere Integrating spheres collect reflected light from samples over a full hemisphere. The sphere, by nature of its internal diffuse (lambertian) reflection and integration of the energy, is insensitive to directional reflectance features coming from the sample, and therefore, gives a very repeatable “averaged” response to the reflectance of the sample placed in the beam at the sphere port. Sample placement and incidence beam/collection alignment are less critical to the measurement results because the integrating sphere looks at representative averaged energy from all angles at the same time. |
 |
 |
 |
| he RTS-3ZC integrating sphere features a 13º/D geometry to allow near normal incidence at 13º and diffuse collection via the instrument’s fiber optic bundle. The interior of the integrating sphere is made of Zenith diffuse polymer material, a solid, machined form of PTFE. Zenith® is a highly reflective (>95%) and Lambertian reflector over the broad spectral range of 350-2500 nm, which provides maximum efficiency and optical performance. A specially designed collimated tungsten light source, included with the sphere, delivers close to solar irradiance levels at the sample. The base sphere assembly includes six ports designed to accept supplied sample holders, light source assembly, fiber optic adapter, light trap, and port plugs. Two nominal 99% Zenith® diffuse reference standards, one calibrated and one uncalibrated are included with the assembly for absolute or relative spectral reflectance measurements |
Illumination and Light Sources:
|
• Fiber Optic Illuminator: • ASD Pro Lamp:
|
||
| Light Box | ProLamp with Tripod | LowProfile_RCR ve ProLamp |
 |
 |
 |
Foreoptics
 ASD offers a wide selection of foreoptics accessories for use with the FieldSpec® 3 and HandHeld systems to meet a variety of application needs, including: |
|
|
Your ASD sales representative can guide you in the right direction when selecting the foreoptic accessories best suited for your application requirements. |
 |
| Foreoptics and Foreoptics Adaptors List: | |
| • HH, Full Sky Irradiance Cosine Receptor • 20 Deg HH Field-of-View Tube, • SMA, FieldSpec HH Adapter • Full Sky Irradiance Remote Cosine RCR • ASD RCR Cold Weather • 1 Deg HH FOV Lens Foreoptic • 3.5 Deg HH FOV Lens Foreoptic • 7.5 Deg HH FOV Lens Foreoptic • 10 Deg HH FOV Lens Foreoptic • 1 Deg VNIR FOV Lens Foreoptic • 1 Deg NIR/FR FOV Lens Foreoptic • 2 Deg VNIR FOV Lens Foreoptic • 3 Deg VNIR FOV Lens Foreoptic • 3 Deg NIR/FR FOV Lens Foreoptic • 4 Deg VNIR FOV Lens Foreoptic |
• 5 Deg NIR/FR FOV Lens Foreoptic • 8 Deg VNIR FOV Lens Foreoptic • 8 Deg NIR/FR FOV Lens Foreoptic • 10 Deg VNIR FOV Lens Foreoptic • 10 Deg NIR/FR FOV Lens Foreoptic • Direct Irradiance Attachment • Foreoptic Equatorial Mount • Low Profile Full Sky RCR • Reflective Cosine Receptor • Reflective Cosine Receptor with Dome • 5 Deg Underwater VNIR FOV Lens • 10 DegFR (4 degVNIR) Underwater FOV Lens • 20 Deg Underwater FOV • FS Underwater Cosine Receptor |
Carriers
|
Ergonomic Pro-Pack Backpack:
|
 |
Fiber Optic Cables
| Fiber Optic Jump Cables Fiber optic cables are available in a variety of lengths and styles for different application requirements. No matter your application, ASD can provide the cable you need to best meet your analysis requirements. We offer cables in a variety of lengths and bundle sizes, with the connectors specific to the instrument and accessories. |
 |
 |
Instable Fiberoptics Cable List 2.5m VNIR UW Low OH Fiberoptic Jumper 2.5m VNIR UW UV Enhanced F.O. Jumper 5.0m VNIR Low OH UW Fiberoptic Jumper 5.0m FR Low OH UW Fiberoptic Jumper C 10.0m VNIR UW LowOH FiberopticJumprCa 10.0m FR UW Low OH Fiberoptic Jumper 20.0m VNIR UW Low OH Fiberoptic Jumper 1.0m VNIR Low OH Fiberoptic Jumper 1.5M FR Low OH Fiberoptic Jumper Cable 1.0m FR Low OH Fiberoptic Jumper Cable 1.5m SMA-to-VNIR Low OH FO Jumper 2.0m VNIR Low OH Fiberoptic Jumper Cable 2.0m FR Low OH Fiberoptic Jumper Cable 3.0m VNIR Low OH Fiberoptic Jumper Cable 3.0m UV enhanced Fiberoptic Jumper 3.0m SMA to FR Low OH Fiberoptic Jumper 4.0m VNIR Low OH Fiberoptic Jumper C 5.0m FR Low OH Fiberoptic Jumper Cable 6.0m Low OH to FR Fiberoptic Jumper 10.0m VNIR Low OH Fiberoptic Jumper 15.0m VNIR Low OH Fiberoptic Jumper C |
|
 |
 |
|
Various Accessories
| • Attenuator: The light sources of ASD may be ver glossy for some fiberoptics. In order to have signal saturation during the measurements, this attenuator is plugged into fiberoptics. |
 |
• Cuvette Adapter: |
 |
|
• Direct irradiance attachment: |
| • Fiberoptic Reflectance Probe : ASD offers a variety of reflectance probes for various contact reflectance measurements. A selection of spacer attachments can be combined with the reflectance probe for distance uniformity depending upon the sample size and type. It consists of ; - SMA connectives - Two sided 0.8cm radius with steel cap 780 fiberoptics. |
 |
 |
 |
| 90 derece rtangle | ASD Pro Reflectance Probe`a sağ açılı bakış. Aksesuar ayrı satılır. |
|
• TS Battery Pack |
 |
| • Filter-Wheel: The ASD Filter Wheel — the powerful little tool you need to guarantee the calibration of your ASD instrument prior to each operation. The Filter Wheel tests wavelength, linearity, and noise, thereby rapidly verifying the instrument is in compliance and meeting USP, GMP, and ISO requirements. |
 |
| • Remote Trigger: This accesory is useful to collect spectras by just clicking on the trigger. This trigger uses the USB interface and can be installed easily from CD-ROM or stick pads. |
 |
|
• Referance Panels (Spectralons) : |
 |
| Referance Panel Type | Product Number |
Referance Panel Type |
Product Number | |
| Spectralon, 2x2 inch (5x5cm) Uncal. Wht Spectralon, 2x2 inch (5x5cm) Cal. White Spectralon, 3.62"Dia. Round x 5mm Un Cal 3.62" Dia. Spectralon Assembly Spectralon, 5x5 inch (12.7x12.7cm) Uncal Spectralon, 5x5 in (12.7x12.7cm) Cal Wht Spectralon, 5x5 inch Cal. 50% Gray Spectralon, 10x10in(25.4x25.4cm) Cal Wht Spectralon, 12x12 in(35x35cm)Uncal Wht Spectralon 12x12 in (35x35cm) Cal. Wht Spectralon, 18x18in (45.6x45)Uncal Wht Spectralon, 18x18in(45.6x45.6cm) Cal Wht Spectralon, 24x24 in Uncal. Wht Spectralon, 24x24in (61x61cm) Cal Wht Spectralon, 2x2 Cal. 50% Gray Spectralon, 5x5 inch Cal. 12% Gray |
128000 128150 128001 A128001 128030 128160 128110 128170 128050 128180 128060 128190 128070 128200 128100 128121 |
Spectralon, 10x10 inch Uncal. 10% Spectralon, 10X10 inch Cal. 10% Gray Spectralon, 10x10 inch Uncal. 25% G Spectralon, 10X10 inch Cal. 25% Gray Spectralon 2 X 2 Inch Cal Black Spectralon, 18 x 18 inch Cal’d MultiStep Encap. Grey Stds (8) w/Cal St (USP 1119) Standards, Encapsulated Grey Scale, (8) Standard, Wavelength Calibration Standard, Grey Encap qty5 w/Cal Standard Spectralon, Wooden Case for 5 x 5 Spectralon, Wooden Case for 10 x 10 Spectralon, Wooden Case for 12 x 12 Spectralon, 1" Dia 99% White Calibrated Spectralon, 1" Diameter WR Cap Accessory Small White Reference for Mug Light |
128370 128350 128380 128360 128151 128391 A128392 128392 128393 128394 128300 128310 128320 128395 128003 A122633 A128003 |
